ew0-200 Free Demo Download
Certinside offers free demo for ew0-200 240 Q & As with Expert Explanations). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.
Download ew0-200 Exam Pdf Demo
Download ew0-200 Exam iEngine Demo
Exam : Extreme Networks EW0-200
Title : Extreme Networks Associate(ena)
1. The acronym TCP/IP stands for:
A. Transport Control Protocol/Internal Protocol
B. Transmission Control Protocol/ International Protocol
C. Transfer Control Policy/Interactive Protocol
D. None of these
Answer: D
2. In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer: A
3. The modular BlackDiamond 6804 switch supports the following legacy WAN modules?
(Choose all three that apply)
A. 2-port SONET/SDH OC-12c/STM-4 PoS
B. 4-port SONET/SDH OC-3c/STM-1 PoS
C. 4-port SONET/SDH OC-3/STM-1 ATM
D. 16-port SONET/SDH T3/E3 PoS/ATM
Answer: A,B,C
4. Exhibit:
You have been assigned the task of configuring an 8-port load share group between two
switches that use the address-based algorithm. Which of the following commands will
provide you with the desired result?
A. Summit #1: enable sharing 1 grouping 1-8 algorithm address-based
Summit #2: enable sharing 8 grouping 1-8 algorithm address-based
B. Summit #1: enable sharing 1 grouping 1-8 algorithm address-based
Summit #2: enable sharing 1 grouping 1-8 algorithm address-based
C. Summit #1: enable sharing 1 grouping 1-8 address-based algorithm
Summit #2: enable sharing 1 grouping 1-8 address-based algorithm
D. None of the above.
Answer: B
5. In an Extreme Switch, the routing function is disabled on all VLANs by default.
A. TRUE
B. FALSE
Answer: A
6. What information is not provided by the CLI command: show version?
A. The ExtremeWare software image version and the build date and time
B. The MAC address of the switch
C. The Switch Serial Number
D. The BootROM version
Answer: B
7. In an Ethernet LAN, Layer 2 broadcasts reach every device within the same broadcast domain and may cause bandwidth, congestion and delay issues.
A. TRUE
B. FALSE
Answer: A
8. When a port is added to a tagged VLAN, jumbo frame support must be enabled to compensate for the increased frame size.
A. TRUE
B. FALSE
Answer: B
9. In order to set the OSPF router ID to 192.168.0.1 in area 7.7.7.7 which of the following CLI commands should be used?
A. config routerid ospf 192.168.0.1 area 7.7.7.7
B. config ospf routerid 192.168.0.1
C. config ospf 192.168.0.1 routerid area 7.7.7.7
D. config 192.168.0.1 ospf routerid
Answer: B
10. Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C
11. A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the Ethernet frame.
A. TRUE
B. FALSE
Answer: B
12. In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer: A
13. 7.7.7 which of the following CLI commands should be used?
A. config routerid ospf 192.168.0.1 area 7.7.7.7
B. config ospf routerid 192.168.0.1
C. config ospf 192.168.0.1 routerid area 7.7.7.7
D. config 192.168.0.1 ospf routerid
Answer: B
14. What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B
15. 0.1 in area 7.7.7.7 which of the following CLI commands should be used?
A. config routerid ospf 192.168.0.1 area 7.7.7.7
B. config ospf routerid 192.168.0.1
C. config ospf 192.168.0.1 routerid area 7.7.7.7
D. config 192.168.0.1 ospf routerid
Answer: B
3.When a port is added to a tagged VLAN, jumbo frame support must be enabled to compensate for the increased frame size.
A. TRUE
B. FALSE
Answer: B
4.The modular BlackDiamond 6804 switch supports the following legacy WAN modules?
(Choose all three that apply)
A. 2-port SONET/SDH OC-12c/STM-4 PoS
B. 4-port SONET/SDH OC-3c/STM-1 PoS
C. 4-port SONET/SDH OC-3/STM-1 ATM
D. 16-port SONET/SDH T3/E3 PoS/ATM
Answer: A,B,C
5.In an Extreme Switch, the routing function is disabled on all VLANs by default.
A. TRUE
B. FALSE
Answer: A
6.The acronym TCP/IP stands for:
A. Transport Control Protocol/Internal Protocol
B. Transmission Control Protocol/ International Protocol
C. Transfer Control Policy/Interactive Protocol
D. None of these
Answer: D
16. Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer: A
