The Best BEA certifications -Visualexams ccna-dumps.com help you pass any IT exams

117-202 Free Demo Download

Certinside offers free demo for 117-202 110 Q & As with Expert Explanations). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.


Download 117-202 Exam Pdf Demo

Download 117-202 Exam iEngine Demo

　
　
Exam : LPI 117-202
Title : LPI Level 2 Exam 202

1. Enter one of the Apache configuration file directives that defines where log files are stored.
Answer: ErrorLog CustomLog ScriptLog RewriteLog TransferLog

2. Journalling doesn’t appear to be working on an ext3 filesystem. When booting, the following line appears:
VFS: Mounted root (ext2 filesystem) readonly.
What could be causing the problem?
A. An old version of e2fsprogs is installed.
B. The kernel does not contain ext3 support.
C. The filesystem is specified as ext2 in /etc/fstab.
D. The system was not shut down cleanly.
Answer: B

3. Which Apache directive allows the use of external configuration files defined by the directive AccessFileName?
A. AllowExternalConfig
B. AllowAccessFile
C. AllowConfig
D. IncludeAccessFile
E. AllowOverride
Answer: E

4. Which of the following organisations track and report on security related flaws in computer technology? (Please select TWO answers)
A. Bugtraq
B. CERT
C. CSIS
D. Freshmeat
E. Kernel.org
Answer: AB

5. Which TWO /etc/hosts.allow entries will allow access to sshd from the class C network 192.168.1.0?
A. sshd : 192.168.1.
B. sshd : 192.168.1
C. sshd : 192.168.1.0 netmask 255.255.255.0
D. sshd : 192.168.1.0/255.255.255.0
E. sshd : 192.168.1.0
Answer: AD

6. A correctlyformatted entry has been added to /etc/hosts.allow to allow certain clients to connect to a service, but this is having no effect. What would be the cause of this?
A. tcpd needs to be sent the HUP signal.
B. The service needs to be restarted.
C. The machine needs to be restarted.
D. There is a conflicting entry in /etc/hosts.deny.
E. The service does not support tcpwrappers.
Answer: E

7. Users in the acl named ’sales_net’ must only be allowed to access to the Internet at times specified in the time_acl named ’sales_time’. Which is the correct http_access directive, to configure this?
A. http_access deny sales_time sales_net
B. http_access allow sales_net sales_time
C. http_access allow sales_net and sales_time
D. allow http_access sales_net sales_time
E. http_access sales_net sales_time
Answer: B

8. 1.0192.168.1.255) needs to be able to relay email through the site’s sendmail server. What line must be added to /etc/mail/access to allow this?
A. 192.168.1.0/24 RELAY
B. 192.168.1 RELAY
C. 192.168.1.0/24 OK
D. 192.168.1 OK
Answer: B
8. To allow X connections to be forwarded from or through an SSH server, what line must exist in the sshd configuration file?
Answer: X11Forwarding yes

9. The syntax of the procmail configuration file is?
A. :0[flags][:[lockfile]]
[* condition]
action
B. [* condition]
action
:0[flags][:[lockfile]]
C. :0[flags][:[lockfile]]
[* condition] action
D. :0:[flags][:[lockfile]]:[* condition]
action
E. :0[flags][:[lockfile]]:[* condition]:action
Answer: A

10. Which statements about the Alias and Redirect directives in Apache’s configuration file are true?
A. Alias can only reference files under DocumentRoot.
B. Redirect works with regular expressions.
C. Redirect is handled on the client side.
D. Alias is handled on the server side.
E. Alias is not a valid configuration directive.
Answer: CD

11. What happens when the Linux kernel can’t mount the root filesystem when booting?
A. An error message is shown, showing which device couldn’t be mounted or informing that init couldn’t be found.
B. An error message is shown and the system reboots after a keypress.
C. An error message is shown and the system boots in maintainence mode.
D. An error message is shown and the administrator is asked to specify a valid root filesystem to continue the boot process.
E. An error message is shown, stating that the corresponding kernel module couldn’t be loaded.
Answer: A

12. A GRUB boot loader installed in the MBR was accidentally overwritten. After booting with a rescue CDROM, how can the lost GRUB first stage loader be recovered?
A. Use cp to restore a previous backup of the MBR.
B. Install LILO since there is no easy way to recover GRUB.
C. Running mformat will create a new MBR and fix GRUB using info from grub.conf.
D. Run grubinstall after verifying that grub.conf is correct.
E. Run fdisk mbr /dev/hda assuming that the boot hardisk is /dev/hda.
Answer: D

13. What command must be used to create an SSH keypair? Please enter the command without the path or any options or parameters.
Answer: ssh-keygen

14. The internal network (192.168.1.0192.168.1.255) needs to be able to relay email through the site’s sendmail server. What line must be added to /etc/mail/access to allow this?
A. 192.168.1.0/24 RELAY
B. 192.168.1 RELAY
C. 192.168.1.0/24 OK
D. 192.168.1 OK
Answer: B

15. In the file /var/squid/url_blacklist is a list of URLs that users should not be allowed to access. What is the correct entry in Squid’s configuration file to create an acl named blacklist based on this file?
A. acl blacklist urlpath_regex /var/squid/url_blacklist
B. acl blacklist file /var/squid/url_blacklist
C. acl blacklist "/var/squid/url_blacklist"
D. acl blacklist urlpath_regex "/var/squid/url_blacklist"
E. acl urlpath_regex blacklist /var/squid/url_blacklist
Answer: D

16. A securityconscious administrator would change which TWO of the following lines found in an SSH configuration file?
A. Protocol 2,1
B. PermitEmptyPasswords no
C. Port 22
D. PermitRootLogin yes
E. IgnoreRhosts yes
Answer: AD

117-201 Free Demo Download

Certinside offers free demo for 117-201 118 Q & As with Expert Explanations). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.


Download 117-201 Exam Pdf Demo

Download 117-201 Exam iEngine Demo

　
　
Exam : Lpi 117-201
Title : LPI Level 2 Exam 201

1. You are compiling some software from source. After running ./configure with the appropriate arguments and no errors, what is the next command to run?
Answer: make make all

2. If the command arp f is run, which file will be read by default?
A. /etc/hosts
B. /etc/ethers
C. /etc/arp.conf
D. /etc/networks
E. /var/cache/arp
Answer: B

3. Your routing configuration relies on eth0 being a 3com card that requires the 3c59x module. What line must be added to modules configuration file, to ensure that eth0 always uses this module?
A. eth0=3c59x
B. alias eth0=3c59x
C. alias eth0 3c59x
D. set eth0 3c59x
E. set eth0=3c59x
Answer: C

4. Using only commands included with named, what is the command, with options or parameters, to make named reread its zone files?
Answer: ndc reload /usr/sbin/ndc reload rndc reload /usr/sbin/rndc reload

5. What is the command to add another IP address to an interface that already has (at least) one IP address?
A. ifconfig eth0:1 192.168.1.2
B. ifconfig eth0 192.168.1.2
C. ipconfig eth0:1 192.168.1.2
D. ipconfig eth0 192.168.1.2
Answer: A

6. A zone file on the DNS server has been updated. Which of the following commands will tell named to reload its zone files? (Please select TWO correct answers)
A. killall HUP named
B. killall named
C. rndc reload
D. rndc flush
E. namedcheckzone r
Answer: AC

7. Your newlycompiled kernel can not find any modules it needs to load. What command was missed when compiling and installing the kernel?
Answer: make modules_install

8. 123.168.192.inaddr.arpa. IN PTR
;; ANSWER SECTION:
5.123.168.192.inaddr.arpa. 600 IN PTR linuserv.example.net.123.168.192.inaddr.arpa.
;; AUTHORITY SECTION:
123.168.192.inaddr.arpa. 600 IN NS linuserv.example.net.
;; ADDITIONAL SECTION:
linuserv.example.net. 600 IN A 192.168.123.5
What might be wrong in the zone definition?
A. Nothing. All seems to be good.
B. There’s no "." after linuserv.example.net in the PTR record in the forward lookup zone file.
C. There’s no "." after linuserv in the PTR record in the forward lookup zone file.
D. There’s no "." after linuserv.example.net in the PTR record in the reverse lookup zone file.
E. The "." in the NS definition in reverse lookup zone has to be removed.
Answer: D
3. A DNS server has the IP address 192.168.0.1. Which TWO of the following need to be done on a client machine to use this DNS server?
A. Add nameserver 192.168.0.1 to /etc/resolv.conf.
B. Run route add nameserver 192.168.0.1.
C. Run ifconfig eth0 nameserver 192.168.0.1.
D. Ensure that the dns service is listed in the hosts entry in the /etc/nsswitch.conf file.
E. Run bind add nameserver 192.168.0.1.
Answer: AD
4. How can the label root be added to the ext2 filesystem on /dev/sda1? Please enter the command with all parameter(s) and/or option(s) below.
Answer: /sbin/tune2fs -L root /dev/sda1 tune2fs -L root /dev/sda1
5. Which single parameter, when passed to nmap, will instruct nmap to perform a fast scan? (Provide only the option)
Answer: -F

9. You have configured a workstation to boot in runlevel 4, but you now find that the X server will not start correctly and the machine will not allow local access. What would be the most effective command to run at the LILO prompt to regain local access to the machine, when the last known working kernel image was linux?
Answer: linux 3 linux 1 linux single linux S linux 2

10. What is the minimum number of disks required in a RAID5 array?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: C

11. Performing a DNS lookup with dig results in this answer:
;; QUESTION SECTION:
;5.123.168.192.inaddr.arpa. IN PTR
;; ANSWER SECTION:
5.123.168.192.inaddr.arpa. 600 IN PTR linuserv.example.net.123.168.192.inaddr.arpa.
;; AUTHORITY SECTION:
123.168.192.inaddr.arpa. 600 IN NS linuserv.example.net.
;; ADDITIONAL SECTION:
linuserv.example.net. 600 IN A 192.168.123.5
What might be wrong in the zone definition?
A. Nothing. All seems to be good.
B. There’s no "." after linuserv.example.net in the PTR record in the forward lookup zone file.
C. There’s no "." after linuserv in the PTR record in the forward lookup zone file.
D. There’s no "." after linuserv.example.net in the PTR record in the reverse lookup zone file.
E. The "." in the NS definition in reverse lookup zone has to be removed.
Answer: D

12. 192.inaddr.arpa. IN PTR
;; ANSWER SECTION:
5.123.168.192.inaddr.arpa. 600 IN PTR linuserv.example.net.123.168.192.inaddr.arpa.
;; AUTHORITY SECTION:
123.168.192.inaddr.arpa. 600 IN NS linuserv.example.net.
;; ADDITIONAL SECTION:
linuserv.example.net. 600 IN A 192.168.123.5
What might be wrong in the zone definition?
A. Nothing. All seems to be good.
B. There’s no "." after linuserv.example.net in the PTR record in the forward lookup zone file.
C. There’s no "." after linuserv in the PTR record in the forward lookup zone file.
D. There’s no "." after linuserv.example.net in the PTR record in the reverse lookup zone file.
E. The "." in the NS definition in reverse lookup zone has to be removed.
Answer: D
3. A DNS server has the IP address 192.168.0.1. Which TWO of the following need to be done on a client machine to use this DNS server?
A. Add nameserver 192.168.0.1 to /etc/resolv.conf.
B. Run route add nameserver 192.168.0.1.
C. Run ifconfig eth0 nameserver 192.168.0.1.
D. Ensure that the dns service is listed in the hosts entry in the /etc/nsswitch.conf file.
E. Run bind add nameserver 192.168.0.1.
Answer: AD
4. How can the label root be added to the ext2 filesystem on /dev/sda1? Please enter the command with all parameter(s) and/or option(s) below.
Answer: /sbin/tune2fs -L root /dev/sda1 tune2fs -L root /dev/sda1
5. Which single parameter, when passed to nmap, will instruct nmap to perform a fast scan? (Provide only the option)
Answer: -F
6. A zone file on the DNS server has been updated. Which of the following commands will tell named to reload its zone files? (Please select TWO correct answers)
A. killall HUP named
B. killall named
C. rndc reload
D. rndc flush
E. namedcheckzone r
Answer: AC
7. You are compiling some software from source. After running ./configure with the appropriate arguments and no errors, what is the next command to run?
Answer: make make all
8. A 2.6.9ac1 kernel would be
A. an alpha kernel.
B. someone’s patch to a stable kernel.
C. a stable kernel.
D. an unstable kernel.
E. someone’s patch to an unstable kernel.
Answer: B

13. One of the IDE hard drives in a server is transferring data very slowly. What command must be run to enable DMA on it?
A. hdparm d /dev/hda
B. hdparm dma /dev/hda
C. hdparm dma /dev/hda1
D. hdparm d /dev/hda1
E. hdparm d 1 /dev/hda
Answer: E

14. To remove the patch patch2.4.28.tar.bz2 from a kernel source tree, the command that must be used is:
A. bunzip2 ../patch2.4.28.tar.bz2 | patch rp1
B. bunzip2 ../patch2.4.28.tar.bz2 | patch Rp1
C. bunzip2 c ../patch2.4.28.tar.bz2 | patch Rp1
D. bunzip2 c ../patch2.4.28.tar.bz2 | patch rp1
E. bunzip2 ../patch2.4.28.tar.bz2 | unpatch p1
Answer: C

15. How can the label root be added to the ext2 filesystem on /dev/sda1? Please enter the command with all parameter(s) and/or option(s) below.
Answer: /sbin/tune2fs -L root /dev/sda1 tune2fs -L root /dev/sda1

16. 168.192.inaddr.arpa. IN PTR
;; ANSWER SECTION:
5.123.168.192.inaddr.arpa. 600 IN PTR linuserv.example.net.123.168.192.inaddr.arpa.
;; AUTHORITY SECTION:
123.168.192.inaddr.arpa. 600 IN NS linuserv.example.net.
;; ADDITIONAL SECTION:
linuserv.example.net. 600 IN A 192.168.123.5
What might be wrong in the zone definition?
A. Nothing. All seems to be good.
B. There’s no "." after linuserv.example.net in the PTR record in the forward lookup zone file.
C. There’s no "." after linuserv in the PTR record in the forward lookup zone file.
D. There’s no "." after linuserv.example.net in the PTR record in the reverse lookup zone file.
E. The "." in the NS definition in reverse lookup zone has to be removed.
Answer: D
3. A DNS server has the IP address 192.168.0.1. Which TWO of the following need to be done on a client machine to use this DNS server?
A. Add nameserver 192.168.0.1 to /etc/resolv.conf.
B. Run route add nameserver 192.168.0.1.
C. Run ifconfig eth0 nameserver 192.168.0.1.
D. Ensure that the dns service is listed in the hosts entry in the /etc/nsswitch.conf file.
E. Run bind add nameserver 192.168.0.1.
Answer: AD