The Best BEA certifications -Visualexams ccna-dumps.com help you pass any IT exams

md0-205 Free Demo Download

Certinside offers free demo for md0-205 120 Q & As with Expert Explanations). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.


Download md0-205 Exam Pdf Demo

Download md0-205 Exam iEngine Demo

　
　
Exam : McDATA MD0-205
Title : mcdata certified storage network designer exam

1. A customer has significant power considerations. They want to purchase a switch from McDATA that uses the least power while still maintaining power supply redundancy. Which switch is the best choice for them?
A. Intrepid 10000
B. Intrepid 6140
C. Sphereon 3232
D. Sphereon 4300
E. Sphereon 4500
Answer: E

2. Which two characteristics of a customer’s infrastructure are relevant to a Storage Area Network design? (Choose two.)
A. Type of SCSI connectors
B. Number of existing storage ports
C. Number of applications per server
D. Type of fiber optic cabling installed
E. Distance between client workstation and server
Answer: BD

3. Which three configuration changes require the McDATA Eclipse 1620 to be reset? (Choose three.)
A. SNMP traps
B. zoning changes
C. firmware upgrade
D. SNS configuration
E. management parameters
Answer: CDE

4. For security purposes, what is used to prevent Fibre Channel frames from being stored after a switch is powered off or has failed?
A. FMS
B. OSMS
C. Full Volatility
D. Open Trunking
Answer: C

5. A customer would like to backup an application via the SAN Infrastructure. When the server offloads the backup job to a backup server which performs the backup to SAN attached tape drives, this is a common example of ________________?
A. Server-less backup
B. Hybrid LAN backup
C. Virtual tape backup
D. Tape stripping
Answer: A

6. On the McDATA Intrepid 10000, the upper two or the lower two optical paddles in a Line Module (LIM) cannot both be _____ in a supported configuration.
A. 2 Gbps
B. 4 Gbps
C. 8 Gbps
D. 10 Gbps
Answer: D

7. Which method is best used to specify which servers can access specific LUNs?
A. HBA driver configuration
B. LUN masking in the switch
C. LUN mapping in the server
D. persistent binding in the server
E. LUN masking in the storage array
Answer: E

8. Which of the following is required to achieve 99.999% availability?
A. Dual rack installation
B. Separate power circuits
C. Router connectivity to DR site
D. Dual partitioned Intrepid 10000
Answer: B

9. Which application allows you to export a McDATA SAN Router configuration?
A. EFCM Basic
B. SANtegrity
C. SANavigator
D. EFCM
E. SANvergence Manager
Answer: E

10. When adding a switch to an existing SAN, which two statements are true? (Choose two.)
A. Domain IDs must be unique.
B. Port counts should be the same on all switches.
C. RA_TOV should be consistent across the switches.
D. IP addresses and masks for management must be defined.
E. Zoning of the new switch must be done prior to E_port connections.
Answer: AC

11. Given an environment with a mixture of 1 Gbps and 2 Gbps HBAs connecting to a 2 Gbps switch to a 2 Gbps storage array; which of the following statements is true?
A. 1 Gbps and 2 Gbps devices cannot be mixed on a 2 Gbps switch
B. 2 Gbps devices will negotiate down to 1 Gbps
C. 1 Gbps devices will negotiate up to 2 Gbps
D. Devices will communicate at both 1 and 2 Gbps
Answer: D

12. Click the Exhibit button.
Which technology is illustrated in the exhibit?
A. VPN
B. iFCP
C. FCIP
D. iSCSI
Answer: B

13. 999% availability?
A. Dual rack installation
B. Separate power circuits
C. Router connectivity to DR site
D. Dual partitioned Intrepid 10000
Answer: B
4. A customer has significant power considerations. They want to purchase a switch from McDATA that uses the least power while still maintaining power supply redundancy. Which switch is the best choice for them?
A. Intrepid 10000
B. Intrepid 6140
C. Sphereon 3232
D. Sphereon 4300
E. Sphereon 4500
Answer: E
5. Which two technologies provide Fibre Channel over IP services? (Choose two.)
A. SES
B. iFCP
C. FCIP
D. iSCSI
E. FICON
F. FC-SB2
Answer: BC
6. Click the Exhibit button.
Which technology is illustrated in the exhibit?
A. VPN
B. iFCP
C. FCIP
D. iSCSI
Answer: B
7. On the McDATA Intrepid 10000, the upper two or the lower two optical paddles in a Line Module (LIM) cannot both be _____ in a supported configuration.
A. 2 Gbps
B. 4 Gbps
C. 8 Gbps
D. 10 Gbps
Answer: D
8. A customer would like to backup an application via the SAN Infrastructure. When the server offloads the backup job to a backup server which performs the backup to SAN attached tape drives, this is a common example of ________________?
A. Server-less backup
B. Hybrid LAN backup
C. Virtual tape backup
D. Tape stripping
Answer: A
9. Which three features must a switch or director have to support FICON cascading? (Choose three.)
A. port binding
B. fabric binding
C. switch binding
D. Open Trunking
E. persistent binding
F. Insistent Domain IDs
Answer: BCF

14. Which two technologies provide Fibre Channel over IP services? (Choose two.)
A. SES
B. iFCP
C. FCIP
D. iSCSI
E. FICON
F. FC-SB2
Answer: BC

15. You are planning a Disaster Recovery (DR) solution over iFCP using Eclipse SAN Routers. What should be equal in both connected fabrics?
A. Zone ID
B. Fabric ID
C. Domain ID
D. IP address
E. storage array port number
Answer: A

16. A customer has a requirement that tape backup not interfere with application throughput. Which two options can accomplish this? (Choose two.)
A. Install an HBA for tape traffic
B. Create a separate tape SAN
C. Utilize a LAN-free backup solution
D. Increase ISL connectivity between switches
Answer: AB

　
　
Exam : McDATA MD0-251
Title : mcdata certified ip san specialist exam

1. In a metropolitan area network (MAN) using DWDM, Fast Write does NOT appear to improve write performance. Why?
A. The latency is negligible.
B. Fast Write does not work over DWDM.
C. There are too many outstanding write commands, which cause Fast Write to shut off.
D. There are not enough round trips required to complete the write for Fast Write to work.
Answer: A

2. Which three of the following are clear advantages of synchronous data replication over asynchronous data replication? (Choose three.)
A. Redundancy
B. More cost effective
C. Faster recovery time
D. Increased data protection
E. Longer distance capability
Answer: ACD

3. Which TCP socket port does iFCP use for normal data transfer?
A. 1812
B. 3260
C. 3420
D. 37121
Answer: C

4. Before any of the mSNS’s can communicate with each other, the SAN Router’s system address must be configured on ________________?
A. the same Inband network
B. a different Inband network
C. the same Out-of-band network
D. a different Out-of-band network
Answer: A

5. Which UDP port number does SANvergence Manager use?
A. 21
B. 23
C. 161
D. 162
Answer: C

6. What is the valid range of traffic shaping values for a zone?
A. 1 – 512 Mbps
B. 1 – 100 MBps
C. 1 – 125 MBps
D. 1-10 Gbps
Answer: C

7. With which two network variables (where either one or both are present) should you use Fast Write?on an iFCP port? (Choose two.)
A. 1 ms of latency on iFCP network
B. 2 ms of latency on iFCP network
C. 100 km of distance between iFCP peer ports
D. 200 km of distance between iFCP peer ports
Answer: BD

8. Which address is a publicly routable IP address?
A. 10.1.1.10
B. 172.16.31.12
C. 192.168.0.1
D. 208.10.1.1
Answer: D

9. Which management interface allows you to create a single uploadable, modifiable configuration file?
A. SNMP
B. Element Manager
C. SANvergence Manager
D. Command Line Interface
Answer: D

10. What type of optics are supported on the Eclipse 2640 SAN Router?
A. ST
B. SC
C. XFP
D. SFP-LC
Answer: D

11. How many usable addresses are in a Class C network with a subnet mask of 255.255.255.252?
A. 1
B. 2
C. 4
D. 8
Answer: B

12. When enforcing zoning using the append zone policy, which application allows the zoning to be changed?
A. SAN Router zones are only managed by EFCM
B. SAN Router zones are only managed by EFCM basic
C. SAN Router zones are only managed by SANvergence
D. SAN Router zones can be managed by any application
Answer: C

13. Which two are characterics of synchronous data replication? (Choose two.)
A. More cost effective
B. Increased data protection
C. Acknowledgement of data
D. Supports longer distances
Answer: BC

14. What are the default read and write community strings for the McDATA Eclipse SAN Router? (Choose two.)
A. public
B. Modify
C. private
D. password
E. Password
Answer: AC

15. 1.1.10
B. 172.16.31.12
C. 192.168.0.1
D. 208.10.1.1
Answer: D
9. Which TCP socket port does iFCP use for normal data transfer?
A. 1812
B. 3260
C. 3420
D. 37121
Answer: C
10. Which protocol allows for fault isolation between fabrics across the WAN?
A. iFCP
B. FICON
C. TankIO
D. TCP/IP
Answer: A

md0-235 Free Demo Download

Certinside offers free demo for md0-235 120 Q & As with Expert Explanations). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.


Download md0-235 Exam Pdf Demo

Download md0-235 Exam iEngine Demo

　
　
Exam : McDATA MD0-235
Title : mcdata certified storage network implementer exam

1. You are using the EFCM Basic on a Sphereon 4700 Switch to create zone sets. How many active zone sets can you store on the switch using EFCM Basic?
A. 1
B. 2
C. 32
D. 64
Answer: A

2. Which three settings in the Configure Switch Parameter must be set in FICON cascading on an Intrepid?6140 Director? (Choose three.)
A. insistent
B. rerouting delay
C. Domain RSCNs
D. buffer to buffer credits
E. suppress zoning RSCNs on zone set activations
Answer: ABC

3. Which two tools are generally used to restore a Sphereon switch configuration? (Choose two.)
A. CBR
B. EFCM Basic
C. TFTP
D. Maintenance port
Answer: AB

4. You need to load firmware to the Intrepid 10000 using CLI, what is required to accomplish this task?
A. E/OSn firmware, FTP server
B. E/OSn firmware, TFTP server
C. E/OSn firmware, telnet connection
D. E/OSn firmware, SSH connection
Answer: A

5. Which two are lost when changing from McDATA Mode to Open Mode using EFCM? (Choose two.)
A. hard zoning
B. zoning by port
C. default zoning
D. zoning by WWN
Answer: BC

6. Which statement is true if only one switch is installed on a dedicated LAN?
A. Network addresses require change.
B. Network addresses do not require change.
C. The MAC address requires change, but the IP address does not require change.
D. The IP address requires change, but the MAC address does not require change.
Answer: B

7. x and want to compare it with your existing active zone set. What is the most efficient method to accomplish this?
A. use the compare feature in the zoning library
B. generate a Zone Report from Reports menu and compare zones
C. generate a Data Collection and compare the results of Zoning Logs
D. export the existing zone set to a spreadsheet and compare by sorting
Answer: A
6. Which three settings in the Configure Switch Parameter must be set in FICON cascading on an Intrepid?6140 Director? (Choose three.)
A. insistent
B. rerouting delay
C. Domain RSCNs
D. buffer to buffer credits
E. suppress zoning RSCNs on zone set activations
Answer: ABC
7. Which three can be used to change the product network address for an Intrepid 6140? (Choose three.)
A. CLI
B. SANpilot
C. EFC Manager
D. maintenance port
Answer: ABD
8. When you configure a switch or director to operate in Open Fabric Mode 1.0, which feature do you lose?
A. aliases
B. port binding
C. default zone
D. Insistent Domain ID
Answer: C

8. You just installed three Intrepid 6140 Directors and EFCM at a customer’s site. After installation, the customer reports problems with the fabric. Technical Support wants all the logs and configuration data for troubleshooting. What is the most efficient way to gather the information for Technical Support?
A. use EFCM Basic and export Configuration Report and logs
B. use CLI to FTP the logs to Technical Support
C. use EFCM to export Configuration Reports and log files for each director
D. use Group Configuration Manager in EFCM v8.6 to perform data collections on all three directors
Answer: D

9. What must be the same to successfully export zones when implementing Eclipse SAN Routers?
A. zone ID
B. Domain ID
C. zone Name
D. Fibre Channel address
Answer: A

10. What is the default TCP/IP port for SNMP trap events?
A. 80
B. 162
C. 163
D. 3260
Answer: B

11. When Enterprise Fabric Mode is enabled, which SANtegrity?features are active?
A. switch binding, fabric binding
B. Open Trunking, Domain RSCNs
C. FICON cascading, FICON intermix modes
D. port binding, EFCM Element Manager binding
Answer: A

12. You have created a new zone set with EFCM v8.x and want to compare it with your existing active zone set. What is the most efficient method to accomplish this?
A. use the compare feature in the zoning library
B. generate a Zone Report from Reports menu and compare zones
C. generate a Data Collection and compare the results of Zoning Logs
D. export the existing zone set to a spreadsheet and compare by sorting
Answer: A

13. Which three procedures require Ethernet LAN access? (Choose three.)
A. accessing Element Manager for SAN Routers
B. planning Fibre Channel and Gigabit Ethernet cable routing
C. configuring Fibre Channel products in-band
D. configuring Fibre Channel products out-of-band
E. accessing Simple Network Management Protocol (SNMP) or remote user workstations
Answer: ADE

14. When cascading FICON directors, what must be installed on a McDATA?director or switch?
A. SANtegrity?Binding
B. ISL fencing
C. ISL trunking
D. E/OSi v6.0 firmware or higher
Answer: A

15. Which three can be used to change the product network address for an Intrepid 6140? (Choose three.)
A. CLI
B. SANpilot
C. EFC Manager
D. maintenance port
Answer: ABD

16. The current fabric has just been consolidated and you now want to properly secure it. Which action ensures that no other switches can be accidentally added to the fabric?
A. disabling Open Fabric Mode
B. enabling McDATA Fabric Mode
C. enabling FMS with Port Binding
D. enabling Enterprise Fabric Mode
Answer: D